SDV Architecture · Tabletop Lab Kit

Eclipse SDV / Velocitas Architecture Kit

Kuksa.val vehicle signal broker, Velocitas vehicle apps and OTA deployment — the open-source SDV stack running on real automotive compute.

  • Real automotive hardware, tabletop scale
  • 5 guided learning outcomes
  • Lab guide, exercises & instructor notes
  • Pre-integrated and tested by ANCIT

What it does

This kit demonstrates the Eclipse SDV open-source stack with Kuksa.val as the vehicle signal broker. An S32K344 board bridges CAN sensor data into normalised Vehicle Signal Specification (VSS) signals, published into Kuksa.val on the S32G2's Linux partition. A Raspberry Pi 5 runs Velocitas vehicle apps that subscribe to those signals and publish actuation commands back through the broker.

A 7-inch touchscreen shows a Velocitas cockpit widget with live signals and OTA status. Eclipse Leda demonstrates the edge-to-cloud OTA pipeline through a local MQTT broker, and SOME/IP bridges the databroker to the S32K344's CAN network — the hybrid Classic + Adaptive architecture OEMs are building today.

Who it's for

  • OEM and Tier-1 SDV / vehicle-software teams
  • Connected-vehicle and OTA engineers
  • Universities building SDV curricula
  • SDV Centres of Excellence

System architecture

How the pieces talk to each other on the bench.

Key hardware

NXP S32G2 evaluation boardGoldVIP / RDB2 — Linux + RTOS partitioned, Kuksa.val host
Raspberry Pi 5 (8 GB)Velocitas vehicle-app runtime
NXP S32K344 EVBCAN-to-VSS gateway, Classic AUTOSAR node
7-inch touchscreenCockpit widget and OTA status
100BASE-T1 PHYAutomotive Ethernet link between nodes
MQTT broker (Pi Zero 2 W)Local OTA cloud simulator

Learning outcomes

  1. Deploy Kuksa.val and configure VSS signal paths
  2. Write and deploy a Velocitas Python vehicle app
  3. Trigger and monitor an OTA app update via Eclipse Leda
  4. Configure SOME/IP service discovery across S32G2 and S32K344
  5. Understand the CAN-to-VSS bridge pattern used in production SDV platforms

What's in the box

  • NXP S32G2 evaluation board
  • Raspberry Pi 5 (8 GB) + active cooler
  • NXP S32K344 EVB
  • 7-inch touchscreen display
  • 100BASE-T1 automotive Ethernet PHY
  • IMU and sensor peripherals
  • Raspberry Pi Zero 2 W (MQTT / OTA simulator)
  • Enclosure, switches and 24 V supply with labelled ports
  • ANCIT pre-configured Kuksa.val + Velocitas + SOME/IP stack
  • Velocitas app exercises and VSS signal-mapping guide

Works with

Part of the SDV Architecture cluster — combine them into a complete lab:

All Tabletop Lab Kits

Bring the Eclipse SDV Kit to your lab

Tell us about your lab and we'll send a configuration and quote.

CV Protocols
SDV Architecture
Vehicle Subsystems
ADAS
Networks & Simulation
We reply within one working day. No prices are shared publicly — every lab is configured to your needs.

Thank you!