A live multi-node CANopen network — master, motor drive, I/O and sensor nodes — where automotive body electronics meets industrial automation.
CANopen is where the automotive and industrial-automation worlds meet, and this kit makes that tangible. A CANopen master manages a live network of slave nodes chosen for commercial-vehicle relevance: a CiA 401 digital / analogue I/O module, a CiA 402 brushless motor drive (a pump motor or actuator), and a pressure transducer with a CANopen interface.
Exercises cover Object Dictionary configuration, PDO mapping for cyclic real-time data, SDO parameterisation, and NMT boot and fault recovery. A relay / solenoid output node gives physical, visible feedback as learners drive the network through its NMT states — and the kit extends naturally to a CAN-to-hydraulic-valve scenario used by body builders.
How the pieces talk to each other on the bench.
| CANopen master | PLC / controller — NMT master, SDO and PDO configuration |
|---|---|
| CiA 401 I/O module | 8 digital in / 4 digital out / 2 analogue in |
| CiA 402 motor drive | BLDC drive with velocity and position modes |
| Pressure transducer | 0–10 bar, CANopen process-data output |
| Relay output node | 4-channel, visible NMT-state indication |
| CAN interface | TOSUN USB-CAN — trace, OD editor, PDO mapping |
Part of the CV Protocols cluster — combine them into a complete lab:
All Tabletop Lab KitsTell us about your lab and we'll send a configuration and quote.